Parts

3D parts I built. Feel free to use and/or modify. If you want to build parts yourself, check parts-latest.zip.

Software

Almost everything I've done is CSG with OpenSCAD and a tiny little bit Freecad for MacOS.

I use Cura and my MK3s. I use PLA material. A 0.4mm nozzle. 4-walls. 6-bottom-tops. A speed of 80mm/s. A layer height of 0.15mm and an infill about 20 percent.

I recommend using OctoPrint on a Raspberry Pi to operate it.

I use a second Raspberry Pi with motion (cfg) and a 20 EUR Webcam (Logitech C270) to visually monitor the printing process.

License

All models and source files are written by me and also are licensed under CC BY 4.0. Take a look at https://creativecommons.org/licenses/by/4.0/ if you want to know more.

Additional Tools and Material

Primary Materials

A list of stuff I usually use in combination with printed parts:

Spax 2mm x 10/12mm
Fischertechnik © 4mm Stainless Steel
UHU © Hart Kunststoff Glue
M3 Metall thread cutter
M3 screws of various lengths
Hot glue
For fine parts and warping problems, I use 3DLAC, for example: Amazon EU

Further Materials

bh:10244828

Contact/Support

Want to talk about it? info-parts@mailbox.org

Help/Donate

Feel free to donate, if you like. It would be much appreciated.

Impressum | Donate | catalog-build-2024-11-10-9790219ac0